38772 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38772

Work with aviation OEMs to coordinate/organize and drive the successful conception, development, and/or application of sophisticated avionics systems by: capturing, gathering, and documenting cohesive customer and regulatory requirements; supporting system level designs and subsequent installation and certification in aircraft; and assuring system compliance to all requirements, including quantitative compliance with robustness needs. This position requires oversight of systems engineering activities and technical program coordination responsibilities, as well as direct participation as an aviation system engineer.

Experience and Skills Required:<BR /> -Strong written and verbal communication skills <BR /> -Strong analytical and organizational skills <BR /> -Experience in designing complex electrical system <BR /> -Experience in organizing and driving multi-disciplinary programs<BR /> -Excellent academics (composite GPA greater than or equal to 3.0) <BR /> <BR /> Desirable Qualifications:<BR /> -5+ years applicable experience is a major plus<BR /> -Strong academics (cumulative GPA greater than or equal to 3.5)<BR /> <BR /> EEO/AA/M/F/D/V BS or MS in Electrical, Aerospace, or Software Engineering true false false true false USD 2008-08-19

Olathe KS US Brian Johnson Brian.Johnson@garmin.com Garmin International http://www.garmin.com 38771 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38771 http://www.garmin.com/careers

Conceive, plan, design, implement, and report on broad system level tests for complex integrated avionics systems that span several multi-disciplinary functions. Anticipate, specify, plan, and develop test methods, including test automation tools.

Experience and Skills Required:<BR /> -Test conception and test design for complex electronic and elctro-mechanical systems <BR /> -Test automation, including test scripting capability <BR /> -Communication: written (planning, reporting) and verbal communication skills <BR /> -Relevant education and/or experience in software design, development and maintenance, as required for the successful performance of the essential functions of the position<BR /> <BR /> Desirable Qualifications:<BR /> -Strong academics (cumulative GPA greater than or equal to 3.5) <BR /> -5+ years applicable experience <BR /> -Pilots License <BR /> -Good knowledge of Garmins aviation product lines and customer needs -Bachelor of Science in Electrical Engineering, Software Engineering, Computer Science, Computer Engineering, Aerospace Engineering, or Mechanical Engineering from a four-year college or university <BR /> true false false true false USD 2008-08-19

Olathe KS US Brian Johnson Brian.Johnson@garmin.com Garmin International http://www.garmin.com 38769 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38769 http://www.garmin.com/careers

Support successful conception, development, and/or application of sophisticated avionics systems by creating, gathering and documenting cohesive customer and regulatory requirements: supporting system level designs and subsequent installation and certification in aircraft; and assuring system compliance to all requirements, including quantitative compliance with robustness needs.

Experience and Skills Required:<BR /> <BR /> -Strong written and verbal communication skills <BR /> -Strong analytical and organizational skills <BR /> -Experience in designing complex electrical systems<BR /> -Excellent academics (cumulative GPA greater than or equal to 3.0) <BR /> <BR /> Desirable Qualifications:<BR /> -5+ years applicable experience is a major plus<BR /> -Strong academics (cumulative GPA greater than or equal to 3.5) <BR /> <BR /> <BR /> EEO/AA/M/F/D/V BS or MS in Electrical, Aerospace, or Software Engineering true false false true false USD 2008-08-19

Olathe KS US Brian Johnson Brian.Johnson@garmin.com Garmin International http://www.garmin.com 38768 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38768

Provide on-site engineering support to amicably assure the successful definition, integration, operation, and certification of Garmin avionics in customer airplanes. Work directly with the customer to closely understand core technical and programmatic requirements and desires, and proactively communicate and work with the Garmin technical team to meet and exceed those. Position is based at customer site.

Experience And Skills Required:<BR /> -Work well with people in challenging circumstances at a customer site<BR /> -Flexibility to provide support after business hours <BR /> -Results-orientated<BR /> -Excellent academics (cumulative GPA greater than or equal to 3.0)<BR /> <BR /> Desirable Qualifications:<BR /> -In-depth knowledge of Garmin avionics systems<BR /> -Pilot or ground school experience<BR /> -Strong academics (cumulative GPA greater than or equal to 3.5)<BR /> <BR /> <BR /> EEO/AA/M/F/D/V Education:<BR /> -Bachelor of Science in Electrical, Aerospace or Mechanical Engineering or equivalent experience<BR /> true false false true false USD 2008-08-19

Duluth MN US Garmin International http://www.garmin.com 38767 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38767

Sheetmetal Technician<BR />

true false false false true USD 2008-08-19

Fort Worth TX US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38766 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38766 http://www.garmin.com/careers

Develop software for Garmin products in a team-oriented environment.

Experience and Skills Required:<BR /> -Detail-oriented individual with the ability to prioritize and manage multiple tasks <BR /> -Strong verbal and written communication skills <BR /> -Relevant experience and/or training in a high level language such as C, C++, C# or Java <BR /> -Relevant experience and/or training in data structures or object oriented design methodology <BR /> -Relevant education and/or experience in software design, development and maintenance, as required for the successful performance of the essential functions of the position<BR /> <BR /> Desirable Qualifications:<BR /> -Excellent academics (cumulative GPA greater than or equal to 3.5) <BR /> -Previous experience working in a team environment <BR /> -Relevant experience in one or more of the Specialization Areas listed below<BR /> <BR /> Specialization Areas:<BR /> -User interface design & development including MFC, Gtk+, Gtkmm or QT <BR /> -Micro computer architecture expert / assembly language programming <BR /> -Windows Mobile, Symbian, Palm, BREW or similar embedded application development <BR /> -Windows or Mac OS application development <BR /> -Cartography/map technology algorithm and application development <BR /> -Embedded Linux platform development (kernel mode, drivers, system libraries, GNU toolchain) <BR /> -Client-server/Web/Enterprise application development using J2ME or J2EE<BR /> <BR /> EEO/AA/M/F/D/V -Bachelor of Science or above in Computer Science, Electrical Engineering, Computer Engineering, Aerospace Engineering, Math or Physics from a four-year college or university, or equivalent education/experience <BR /> -Strong academics (cumulative GPA greater than or equal to 3.0 as a general rule) <BR /> true false false true false USD 2008-08-19

Olathe KS US Brian Johnson Brian.Johnson@garmin.com Garmin International http://www.garmin.com 38765 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38765

This faculty position will provide instruction in various phases of the Aviation Maintenance Program. A current Airframe and Powerplant certificate is required. Experience as an aircraft mechanic required with both turbine and reciprocating engine experience desired. Candidates must be able to work well with diverse populations, demonstrate sensitivity to cultural differences, and thrive within a team environment.<BR /> <BR /> Instructors will be expected to follow a prescribed syllabus and course outline while developing their own lesson plans and class projects. The teaching requirement is for 6 hours of student contact each day. Current hours of instruction are 7:00 am to 1:00 pm. This position may teach during the day or the evening depending on the instructional needs of SSCC. The program is overseen and monitored by the FAA. <BR /> <BR /> true false false false true USD 2008-08-18

Seattle WA US Jeremy Beams JBeams@sccd.ctc.edu South Seattle Community College http://www.sccd.ctc.edu 38764 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38764

STS Services Inc., is currently looking for Sheet Metal mechanics with 3 + years recent experience performing overhaul maintenance on commercial aircraft for long term positions in San Antonio, TX. One of the most important things, STS Services doesnt charge our mechanics a placement fee!!

* Full set of Sheet Metal Tools<BR /> * 3 Years + Commercial Overhaul Experience<BR /> * Willingness to work Overtime<BR /> true false false false true USD 2008-08-18

San Antonio TX US recruiting.avem@airjobs.com 800-359-4STS STS Services http://www.stsservices.com 38763 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38763 www.careers.northropgrumman.com

Primary Function: <BR /> <BR /> Plan, coordinate, and perform structural/sheetmetal modifications and repairs. Fabricates piece parts using design data. Improvise tooling and methods as required to complete jobs. Certify all work performed. Must meet / maintain minimum tool inventory requirements.<BR /> <BR />

Experience Requirement: <BR /> <BR /> Eight years experience within the last 10 years in performing structural repairs, modifications, and fabrication of aircraft and piece parts. Ability to read, and analyze and interpret complex drawings, structural manuals and technical directives. Familiar with all types of structural tooling and hardware. Strong interpersonal skills and the ability to work well with team environment. Experience in or the willingness to perform tank work. <BR /> Education Requirements: <BR /> <BR /> High school diploma /GED <BR /> ONE of the following licenses a plus:<BR /> Airframe<BR /> Powerplant<BR /> Repairman (Liquid Penetrant Inspection)<BR /> Repairman (Altimeter/Transponder Certification)<BR /> FCC GROL with Radar Endorsement<BR /> true false false true false USD 2008-08-18

Hagerstown MD US Northrop Grumman Corporation http://www.northropgrumman.com 38762 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38762

A&P Lic., inst/ringout of avionics equip./circuitry<BR /> Must have 48 months prior experience<BR /> High school + 2-3 years trades training

true false false false true USD 2008-08-15

Wichita KS US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38761 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38761

Inspect, troubleshoot, test repair, and maintain aircraft including upholstery, carpet, cabinetry, other cabin furnishings and equipment. The Interior Technician's responsibilities may also include maintaining survival and evacuation equipment, such as rafts, flotation devices, and escape slides in cabins. The interior technician may also be required to install or modify these systems and related components. <BR /> <BR /> Essential Duties and Responsibilities: <BR />  Supervises and directs the Interior Department personnel. <BR />  Responsible for quality and quantity of interior work, man-hours expended, interpretation of written and verbal orders from the Interior Manager, job assignments, job priorities as requested by the Interior Manager. <BR />  Assures completion of all work orders assigned to Interior Department. <BR />  Assist the Interior Manager in determining unit production time rates and shop backlogs. <BR />  Coordinates with Interior Manager on final inspection of interior work. <BR />  Assures technicians' labor hours and parts are charged to proper work order. <BR />  Removes, refurbishes and installs aircraft interiors per customer specifications. <BR />  Utilizes schematic drawings and blueprints. <BR />  Uses all tools and equipment required to perform the job. <BR />  Performs all carpentry work for aircraft interiors per customer specifications. <BR />  Presents a clean and neat work area to our customers. <BR />  Performs other duties as may be required. <BR /> <BR /> Knowledge Skills and Abilities: <BR />  Skills in sewing, aircraft seat design, aircraft interior design, and leather work. <BR />  Skills in wood working, Formica, fiberglass, veneers, composites and laminates. <BR />  Knowledge of FAA requirements for aircraft interiors. <BR />

Minimum Qualifications: <BR />  Interior Technician II Team Lead - 8-10 years of directly related work experience in aircraft interiors and cabinetry. Experience with sheet metal, painting, and some aircraft maintenance helpful. <BR />  At lest 2 years supervisor experience. <BR /> true false false false true USD 2008-08-15

San Antonio TX US resume@smart-inc.com S.M.A.R.T. http://www.smart-inc.com 38760 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38760

Need high Level avionics techs to perform avionics Installs on Bombardier (Global Express) and/ or Challenger aircraft. - Must have Global Express or Challenger experience. You will receive 5 free SMART shirts with this contract.

Challenger, Global Express or Gulfstream avionics experience true false false false true USD 2008-08-15

Savannah GA US resume@smart-inc.com S.M.A.R.T. http://www.smart-inc.com 38759 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38759

Wire harness building and Installation on Cessna Citations, King Airs, and Twin Commander aircraft. Long term job.

Must have 3 years experience of avionics building and wire harness building. Installation experience is desired as well. You must have your own tools. true false false false true USD 2008-08-15

Indianapolis IN US resume@smart-inc.com S.M.A.R.T. http://www.smart-inc.com 38758 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38758

This job requires the installation and ring out of any avionics equipment and circuitry. Such as radar, pulse, navigation, flight directors, computers, slaved compass systems, auto pilots and IFR systems installed in the aircraft prior to flight. Diagnose and correct malfunctions. Assist lower level technicians in the performance of their duties as required. <BR />

2 or more years of trade or training in avionics on aircraft preferred corporate HS Diploma/GED true false false false true USD 2008-08-15

Tampa FL US resume@smart-inc.com S.M.A.R.T. http://www.smart-inc.com 38757 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38757

Working in seat shop..inspecting, cleaning and repairing (remove and replace parts) on aircraft seats. Also be working on commercial aircraft removing and replacing interiors and repairing parts, PSU's and some interior s/m jobs.

Must have A&P license. Must have a Minimum of 2 years experience working on commerical or like aircraft. Must have some sheet metal experience and be able to work from blueprints or enginering orders. Must have your own tools. A&P License true false false false true USD 2008-08-15

Rome NY US resume@smart-inc.com S.M.A.R.T. http://www.smart-inc.com 38756 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38756

Repair and maintain components used for aircraft airframe and powerplant. They inspect aircraft engines, landing gear, instruments, pressurized sections, accessories - brakes, valves, pumps, and air-conditioning systems. Maintain records related to the maintenance performed on the aircraft. Mechanics conduct inspections following a schedule based on the number of hours the aircraft has flown, calendar days since the last inspection, cycles of operation, or a combination of these factors. They repair or replace worn or defective parts. Mechanics may also repair sheet metal or composite surfaces. Mechanics rely on the pilots description of a problem to find and fix faulty equipment. Some mechanics work on one or many different types of aircraft, such as jets, propeller-driven airplanes.They interpret technical manuals, drawings and blue prints.

Must have valid A&P license true false false false true USD 2008-08-15

Van Nuys CA US resume@smart-inc.com S.M.A.R.T. http://www.smart-inc.com 38754 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38754

Painter - Senior<BR />

true false false false true USD 2008-08-15

Little Rock AR US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38750 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38750

3+ years experience and A&P License is required. Corporate aircraft experience is a plus!

true false false false true USD 2008-08-15

Lakeland FL US Lisa Blaser jobs@hqaero.com HQ Aero - in FL 38749 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38749

Shipping clerk - packing, shipping, handling of paperwork <BR />

true false false false true USD 2008-08-15

Wichita KS US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38748 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38748

Sheetmetal Mechanic - assembly to meet specs.<BR />

true false false false true USD 2008-08-15

Wichita KS US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38746 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38746

Production Line Inspector - inspect installations, workmanship, etc.<BR />

true false false false true USD 2008-08-15

Wichita KS US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38744 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38744

Material Handler - process production orders, etc.<BR />

true false false false true USD 2008-08-15

Wichita KS US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38742 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38742

Kitting Technician - creating cutouts & nesting for parts within boxes/tubs<BR />

true false false false true USD 2008-08-15

Wichita KS US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38741 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38741

Interior Technician-Sr. - sewing, leatherwork, woodworking, formica, etc.<BR />

true false false false true USD 2008-08-15

Atlanta GA US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38740 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38740

Composite Assembler - pre-fit, assembe, secondary bonding processes<BR />

true false false false true USD 2008-08-15

Wichita KS US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38739 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38739

Avionics/Install Technician-Intermediate - repair, maintain components<BR />

true false false false true USD 2008-08-15

San Antonio TX US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38738 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38738

Avionics/Install Technician-Intermediate - installation/ringout of equip.<BR />

true false false false true USD 2008-08-15

Tampa FL US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38737 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38737

Assembler - prepare/install parts acc. to blueprints and specs.<BR />

true false false false true USD 2008-08-15

Wichita KS US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38736 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38736

Aircraft Interior Technician II Team Lead<BR />

true false false false true USD 2008-08-14

San Antonio Texas US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38735 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38735 www.bfbaeroservices.aero

BFB Aero Services is currently accepting resumes for Upholsters to start ASAP in Little Rock, AR. If you have experience in working with high quality leathers, stitching and sewing a variety of fabricates on aircraft, boats or automobiles. Ideally the approved candidate will have experience in the aviation industry. Submit your resume to info@bfbaeroservices.aero or call 888-444-0366 for additional details.

Able to sew and work with a variety of high end leather and exotic fabricates. true false false false true USD 2008-08-14

Little Rock AR US info@bfbaeroservices.aero BFB Aero Services, LLC http://www.bfbaeroservices.aero 38734 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38734

Procurement/Support - Parts, materials, services<BR />

true false false false true USD 2008-08-14

Englewood CO US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38733 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38733

MaintenanceTech Sr Sp - maintain, overhaul, modify, etc.<BR />

true false false false true USD 2008-08-14

Hawthorne CA US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38732 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38732

Line Maint. Tech. - Installation, Maintenance, repairs<BR />

true false false false true USD 2008-08-14

Hawthorne CA US Rick Davis jobs@teamglobal.com Global Technical Services http://www.teamglobal.com 38730 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38730

Minimum Requirements : Lear Siegler Services, Inc., (LSI) is immediately hiring a qualified Aircraft Structural Repair Mechanic in support of C-5 aircraft depot maintenance operations at Robins AFB, GA. <BR /> <BR /> High School graduate or equivalent with a minimum of five (5) years actual and recent depot level aircraft structural maintenance / repair experience is required.<BR /> <BR /> Must have completed military aviation maintenance training or maintenance technical school curriculum or possess an FAA issued A&P license.<BR /> <BR /> Candidates with prior structural maintenance / repair experience C-5 aircraft will be preferred. <BR /> <BR /> Knowledge and use of special tools / equipment required to perform assigned maintenance tasks is mandatory.<BR /> <BR /> Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks. <BR /> <BR /> Will be required to pass and maintain a U.S. Government security clearance. <BR /> Job Description : The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.<BR /> <BR /> To be considered, candidates must submit a resume directly online at www.urs.apply2jobs.com referencing job requisition number EGG31557.<BR /> <BR /> For more information please call 1-800-999-1770.<BR /> <BR /> <BR /> HJLSI06<BR /> <BR /> : : EOE M/F/D/V<BR /> <BR /> true false false false true USD 2008-08-14

Warner Robins AFB GA US Lear Siegler Services, Inc. http://www.urscorp.com 38729 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38729

Minimum Requirements : Lear Siegler Services, Inc. (LSI) is immediately hiring qualified C-5 Aircraft General Repair Mechanics in support of aircraft depot maintenance operations at Robins AFB, GA.<BR /> <BR /> High School graduate or equivalent with a minimum five of five (5) years actual and recent depot level aircraft maintenance / repair experience is required. <BR /> <BR /> Must have completed military aviation maintenance training or maintenance technical school curriculum or possess an FAA issued A&P license.<BR /> <BR /> Candidates with hyraulic system maintenance / repair experience on the C-5 will be preferred.<BR /> <BR /> Knowledge and use of special tools / equipment required to perform assigned maintenance tasks is mandatory.<BR /> <BR /> Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks. <BR /> <BR /> Will be required to pass and maintain a U.S. Government security clearance. <BR /> Job Description : The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.<BR /> <BR /> To be considered, candidates must submit a resume directly online at www.urs.apply2jobs.com referencing job requisition number EGG31556.<BR /> <BR /> For more information please call 1-800-999-1770.<BR /> <BR /> : : EOE M/F/D/V<BR /> <BR /> true false false false true USD 2008-08-14

Warner Robins AFB GA US Lear Siegler Services, Inc. http://www.urscorp.com 38728 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38728

Minimum Requirements : Lear Siegler Services, Inc. (LSI) is immediately hiring qualified F-15 Aircraft General Repair Mechanics in support of aircraft depot maintenance operations at Robins AFB, GA.<BR /> <BR /> High School graduate or equivalent with a minimum five of five (5) years actual and recent depot level aircraft maintenance / repair experience is required. <BR /> <BR /> Must have completed military aviation maintenance training or maintenance technical school curriculum or possess an FAA issued A&P license.<BR /> <BR /> Candidates with hyraulic system maintenance / repair experience on the F-15 will be preferred.<BR /> <BR /> Knowledge and use of special tools / equipment required to perform assigned maintenance tasks is mandatory.<BR /> <BR /> Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks. <BR /> <BR /> Will be required to pass and maintain a U.S. Government security clearance. <BR /> Job Description : The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.<BR /> <BR /> To be considered, candidates must submit a resume directly online at www.urs.apply2jobs.com referencing job requisition number EGG31555.<BR /> <BR /> For more information please call 1-800-999-1770.<BR /> <BR /> : : EOE M/F/D/V<BR /> <BR /> true false false false true USD 2008-08-14

Warner Robins AFB GA US Lear Siegler Services, Inc. http://www.urscorp.com 38727 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38727

Minimum Requirements : Lear Siegler Services, Inc., (LSI) is immediately hiring a qualified Aircraft Structural Repair Mechanic in support of F-15 aircraft depot maintenance operations at Robins AFB, GA. <BR /> <BR /> High School graduate or equivalent with a minimum of five (5) years actual and recent depot level aircraft structural maintenance / repair experience is required.<BR /> <BR /> Must have completed military aviation maintenance training or maintenance technical school curriculum or possess an FAA issued A&P license.<BR /> <BR /> Candidates with prior structural maintenance / repair experience F-15 aircraft will be preferred. <BR /> <BR /> Knowledge and use of special tools / equipment required to perform assigned maintenance tasks is mandatory.<BR /> <BR /> Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks. <BR /> <BR /> Will be required to pass and maintain a U.S. Government security clearance. <BR /> Job Description : The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.<BR /> <BR /> To be considered, candidates must submit a resume directly online at www.urs.apply2jobs.com referencing job requisition number EGG31554.<BR /> <BR /> For more information please call 1-800-999-1770.<BR /> <BR /> <BR /> HJLSI06<BR /> <BR /> : : EOE M/F/D/V<BR /> <BR /> true false false false true USD 2008-08-14

Warner Robins AFB GA US Lear Siegler Services, Inc. http://www.urscorp.com 38726 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38726

Minimum Requirements : Lear Siegler Services, Inc. (LSI) is immediately hiring qualified Aviation Machinist in support of our depot maintenance support operations at Robins AFB, GA.<BR /> <BR /> Must have five years actual or recent related experience in the field of Aviation Machinist. Must be able to read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.<BR /> <BR /> Knowledge and use of special tools / equipment required to perform assigned maintenance tasks is mandatory.<BR /> <BR /> Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks. <BR /> <BR /> Will be required to have the ability to pass and maintain a U.S. Government security clearance. <BR /> Job Description : Produces replacement parts and new parts in making repairs of metal parts of mechanical equipment. Work involves most of the following: Interpreting written instructions and specifications; planning and laying out of work; using a variety of machinist's hand tools and precision measuring instruments; setting up and operating standard machine tools; shaping of metal parts to close tolerances; making standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining; knowledge of the working properties of the common metals; selecting standard materials, parts, and equipment required for this work; and fitting and assembling parts into mechanical equipment. In general, the machinist's work normally requires a rounded training in machine-shop practice usually acquired through a formal apprenticeship or equivalent training and experience. Applicant will independently plan the work and manufacture parts and items for aircraft from raw stock of various metals, metal alloys, and other materials. Applicant will be responsible for manufacturing casting, forging, weldments, etc. Work is based on detailed drawings, and blueprints, which are used in the overhaul, repair, manufacturing of parts, and items of equipment such as aircraft structures and components, aircraft landing gear, fuel controls, rotor heads, aircraft bushings and fittings. The employee operates several types of machines to accomplish complex tasking and is capable of the full range of machine operations on most types of conventional or CNC machines and their various attachments.<BR /> <BR /> To be considered, candidates must submit a resume directly online at www.urs.apply2jobs.com referencing job requisition number EGG31552.<BR /> <BR /> For more information please call 1-800-999-1770.<BR /> <BR /> : : EOE M/F/D/V<BR /> <BR /> true false false false true USD 2008-08-14

Warner Robins AFB GA US Lear Siegler Services, Inc. http://www.urscorp.com 38725 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38725

Minimum Requirements : Lear Siegler Services, Inc. (LSI) is immediately hiring qualified Aircraft Painters to support USAF aircraft maintenance operations at Robins AFB, GA.<BR /> <BR /> High school graduate or equivalent. Minimum three (3) years recent and actual experience with aircraft painting / depaint procedures and processes is required. <BR /> <BR /> Must have experience using Plastic Media Blast (PMB) paint / corrosion removal equipment. Passing a normal color vision exam is required. <BR /> <BR /> Knowledge and use of special tools/equipment required to perform assigned job related tasks is mandatory.<BR /> <BR /> Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks.<BR /> <BR /> May be required to pass a U.S. Government background security check. <BR /> Job Description : Coats surfaces of aircraft with paint, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices. Removes old paint from aircraft, using liquid paint remover and scraper. Smoothes surface with sandpaper and steel wool. Roughens aluminum surfaces with acid solution and steel wool to ensure paint adheres to surface. Masks and covers portions of surfaces not to be painted. Paints insignia, letters or numerals on aircraft surface using stencils.<BR /> <BR /> To be considered, qualified candidates must submit a resume directly online at www.urs.apply2jobs.com referencing job requisition number EGG31551.<BR /> <BR /> For more information please call 1-800-999-1770.<BR /> <BR /> hjlsi06<BR /> <BR /> <BR /> : : EOE M/F/D/V<BR /> <BR /> true false false false true USD 2008-08-14

Warner Robins AFB GA US Lear Siegler Services, Inc. http://www.urscorp.com 38724 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38724

Minimum Requirements : High school graduate or equivalent. Must have one (1) year of full-time verifiable work experience as an automotive/ diesel mechanic or and/or a one (1) year certificate in automotive or diesel technology. Must be available to work any shift. Must have a valid driver's license. Understanding and use of maintenance manuals related to wheel, track, and engineer type equipment is a plus.<BR /> <BR /> This position requires a criminal background check and pre-employment drug screening.<BR /> <BR /> <BR /> <BR /> <BR /> <BR /> Job Description : THIS POSITION IS LOCATED AT THE MOBILITY CENTER - NEW BOSTON, TX <BR /> <BR /> Assist mechanic by performing routine repairs to light vehicles and other assigned equipment, according to repair manuals, using hand tools and power tools. Cleans, reinstalls, or replaces defective parts, accessories, and components such as worn gaskets, couplings, fittings, electrical, and hydraulics components as directed by supervisors. <BR /> <BR /> Work involves standing, bending, reaching, stretching, crouching and working in tiring and uncomfortable positions. Frequently lifts items weighing 15-25 pounds and occasionally in excess of 45 pounds while handling, installing, removing or maintaining components, assemblies and other supplies.<BR /> <BR /> No relocation or per diem is associated with this contract.<BR /> <BR /> : : EOE M/F/D/V<BR /> <BR /> true false false false true USD 2008-08-14

New Boston TX US Lear Siegler Services, Inc. http://www.urscorp.com 38723 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38723

Minimum Requirements : High school graduate or equivalent at least 5 years as journeyman or equivalent of project management experience. Ability to read and interpret documents such as safety rules, operating and maintenance instruction, procedure manuals and contract delivery orders. Five years of related experience a must. Must have a valid Driver's License.<BR /> <BR /> Prefer direct military experience working with combat and tactical U.S. Army equipment. Must be intimately familiar with all echelons of U.S. Army vehicle maintenance (up to 40 level). Supervisory experience to include assigning, monitoring, and evaluating performance required. Administrative skills to include timekeeping, personnel records management and working with desktop office applications preferred<BR /> <BR /> Salary for this position is $21.32 per hour. No Per Diem or relocation paid. <BR /> Job Description : This candidate will supervise a military vehicle production line for the Lear Siegler Services Mobility Center - East, Fayetteville, North Carolina. This candidate will also supervise the Quality Assurance section.<BR /> <BR /> Plan, direct, and supervise the overall maintenance operation of assigned team. Implement effective control methods in the areas of production, scheduling, inspection, testing and shop safety. Plan physical layout of maintenance and repair facilities. Assure conformance to prescribed standards of production and quality.<BR /> <BR /> Train team members in standard operating procedures. Supervises and assists in preparation of required records, production reports, and administrative requirements to include timekeeping, man-hour tracking and human resources information.<BR /> <BR /> Qualified candidates must apply online in order to be considered. For assistance please contact Harold Holden at 1-877-532-7462 ext. 203.<BR /> <BR /> hjlsi06 <BR /> : : EOE M/F/D/V<BR /> <BR /> true false false false true USD 2008-08-14

Fayetteville NC US Lear Siegler Services, Inc. http://www.urscorp.com 38722 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38722

Minimum Requirements : Lear Siegler Services, Inc. (LSI) is immediately seeking a qualified A-10 Aircraft Electrical Repair Mechanic in support of TCTO modification operations at Davis-Monthan AFB, AZ. <BR /> <BR /> Candidates must be willing / able to travel to various other worksite locations (TBD) upon completion of Boise workload in order to complete overall project mission.<BR /> <BR /> High School graduate or equivalent. Minimum five (5) years actual and recent depot level aircraft avionics / electrical maintenance / modification / repair experience is required. <BR /> <BR /> Must have completed military aviation maintenance training or maintenance technical school curriculum or possess an FAA issued A&P license.<BR /> <BR /> Prior experience with U.S. Air Force TCTO modification operations on the A-10 aircraft highly preferred. Comm / Nav background with operational check / troubleshooting experience a plus.<BR /> <BR /> Knowledge and use of special tools/equipment required to perform assigned maintenance tasks is mandatory.<BR /> <BR /> Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks. <BR /> <BR /> May be required to obtain a U.S. Government secret clearance. <BR /> Job Description : The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.<BR /> <BR /> <BR /> To be considered, candidates must submit a resume directly online at www.urs.apply2jobs.com referencing job requisition number EGG31594.<BR /> <BR /> For more information please call 1-800-999-1770.<BR /> <BR /> <BR /> HJLSI06<BR /> <BR /> : : EOE M/F/D/V<BR /> <BR />

true false false false true USD 2008-08-14

Davis-Monthan AFB AZ US Lear Siegler Services, Inc. http://www.urscorp.com 38721 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38721

REPORTS TO: Director Of Engineering<BR /> <BR /> BASIC FUNCTIONS OF THE JOB:<BR /> <BR /> The Pemco Engineering Department designs, analyzes and approves technical data to support the Passenger-to-Freighter conversion of medium and large bodied aircraft. Responsibilities of this position include analyzing engineering drawings for regulatory compliance; preparation of substantiation reports; advise junior Engineers; resolution of fit and ability to manufacture issues; production of accurate designs with zero rework coordinate use of consultants when necessary; interact with internal and external customers.<BR />

Bachelor Degree in Aerospace, Mechanical or equivalent engineering discipline with a minimum of three (3) years experience in the modification of aircraft. <BR /> Working knowledge of FARs and Pro/E experience are definite pluses. <BR /> Experience using AUTOCAD is required.<BR /> Must have a working knowledge of aircraft structures, materials and material compatibility. <BR /> Must be familiar with shop practices of metal composite structure assemblies. <BR /> <BR /> <BR /> <BR /> <BR /> WORKING RELATIONSHIPS:<BR /> <BR /> Frequent contact within department and constant contact outside department.<BR /> <BR /> WORKING ENVIRONMENT:<BR /> <BR /> Works in all parts of the facility. May work in disagreeable conditions. May work extended hours and/or weekends. <BR /> true false false true false USD 2008-08-14

Dothan AL US Kristina Slay careers@pemcoair.com Pemco World Air Services - Dothan http://www.pemcoair.com 38720 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38720

REPORTS TO: Director Of Engineering<BR /> <BR /> <BR /> <BR /> BASIC FUNCTIONS OF THE JOB:<BR /> <BR /> The Pemco MRO Engineering Department designs, analyzes and approves technical data to support the repair and maintenance of customer check aircraft. <BR />

Bachelor Degree in Aerospace, Mechanical or equivalent engineering discipline with a minimum of three (3) years experience in the designs of repairs for aircraft. <BR /> Working knowledge of FARs and Pro/E experience are definite pluses. <BR /> Experience using AUTOCAD is required.<BR /> Must have a working knowledge of aircraft structures, materials, and material compatibility. <BR /> Must be familiar with shop practices of metal composite structure assemblies. <BR /> <BR /> <BR /> WORKING RELATIONSHIPS:<BR /> <BR /> Frequent contact within department and constant contact outside department.<BR /> <BR /> WORKING ENVIRONMENT:<BR /> <BR /> Works in all parts of the facility. May work in disagreeable conditions. May work extended hours and/or weekends. <BR /> true false false true false USD 2008-08-14

Dothan AL US Kristina Slay careers@pemcoair.com Pemco World Air Services - Dothan http://www.pemcoair.com 38719 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38719

Directs assigned crews in the performance of inspection, maintenance, repair and overhaul of aircraft and/or related equipment in assigned area.

MINIMUM REQUIREMENTS AND QUALIFICATION<BR /> <BR /> <BR /> 1. High School Diploma or equivalent<BR /> 2. Five (5) years experience in heavy aircraft maintenance, including two (2) years in a supervisory capacity, or the demonstrated ability to perform the duties and responsibilities of the position. <BR /> 3. Proficient in the interpretation of blueprints, technical orders, test equipment used in the work described above, and various aircraft components and systems.<BR /> 4. Must hold a valid Airframe license. <BR /> true false false true false USD 2008-08-14

Dothan AL US Kristina Slay careers@pemcoair.com Pemco World Air Services - Dothan http://www.pemcoair.com 38718 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38718 http://aviation.thingamajob.com/jobs/Alabama/Aviation---Director-of-Engineering/1715858?vendor_id=35

A global leader in commercial Aircraft maintenance and modification is currently seeking a Director of Engineering for their Dothan, AL facility. This is a long term position for a Director-level professional with the experience and knowledge required to lead the company&#39;s Engineering Department. Competitive compensation, Benefits package, and Relocation Assistance Director of Engineering responsibilities include: - Establish goals and objectives for engineering department personell - Design and enforce policies, procedures, and processes that outline engineering department operations - Identify, acquire, and allocate necessary resources to include manpower needed for contractual obligations and corporate objectives - Establish budgets, schedules, and work plans - Hire, train, and manage department personnel To Qualify, Applicant must have: - Bachelors Degree in related field (Engineering Preferred) - Director Level Experience - Experience and Knowledge of Aircraft Conversions - Experience with aircraft maintenance, overhaul, and repair operations - Practical Experience working with Military Fixed-Wing Aircraft - Computer simulation modeling and process layout experience - Mathematical measurements and blueprint knowledge Experience with the KC-135, C-130, or P3 Orion preferred * Must possess a current Security Clearance, or have the ability to obtain * * Masters Degree Preferred * If you are qualified for the position, please do not hesitate to contact Cathey Jenkins at 205-986-7680 or email resume to cjenkins@aerotek.com

MRO EXPERIENCE, MILITARY AIRCRAFT, AIRCRAFT CONVERSIONS, PERSONELL DEVELOPMENT, BUDGET MANAGEMENT, DECISON-MAKING SKILLS, BUSINESS OPERATIONS, MANPOWER ANALYSIS, SECURITY CLEARANCE, BACHELORS/MASTERS DEGREE, AVIATION ENGINEERING true false false true false USD 2008-08-14

Dothan AL US cjenkins@aerotek.com 205-986-7680 205-968-6151 Aerotek Aviation, LLC http://www.aerotek.com 38717 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38717 http://aviation.thingamajob.com/jobs/Texas/Aircraft-Cabinet-Maker/1715787?vendor_id=35

Our client is looking for two Aircraft Cabinet Makers\Install for an immediate opening in Dallas TX. Candidates must be very experienced with Aircraft Cabinet making and installation. Must be experienced with reading Blueprints. This position is a six month contract and Per Diem is available for those who Qualify. Our Client is hiring as soon as possible, so please send resumes to Brad Leksan by the following means. Phone: 972.348.1816 Email: bleksan@aerotek.com Fax: 972.671.2206

CABINET MAKING, AIRCRAFT INTERIORS, BLUEPRINT READING true false false true false USD 2008-08-14

Dallas TX US bleksan@aerotek.com 972-348-1816 972-671-2206 Aerotek Aviation, LLC http://www.aerotek.com 38716 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38716 http://aviation.thingamajob.com/jobs/Texas/Aircraft-Avionics-Technician/1715783?vendor_id=35

Position: Aircraft Avionics Technician Location: Dallas, Texas Pay: $18-$24 / Hour A leading corporate company is looking for experienced avionics technicians on a contract to hire basis. The ideal candidate will possess the following qualifications: - FCC License - 3 plus years of experience working avionics on fixed wing aircraft - own tool box The company is a corporate company, but are willing to look at candidates who have good experience with avionics on fixed wing aircraft. If you have a desire to get into the corporate aircraft field, this is an excellent opportunity. The positions are available immediately, so please apply or contact hiring manager Brad Leksan by the following means: Email: bleksan@aerotek.com Phone 972-348-1816 Fax: 972-671-2206

AIRCRAFT AVIONICS, FCC LICENSE true false false true false USD 2008-08-14

Dallas TX US bleksan@aerotek.com 972-348-1816 972-671-2206 Aerotek Aviation, LLC http://www.aerotek.com 38715 AviationEmployment.com http://www.aviationemployment.com/ http://www.aviationemployment.com/job-listings/list-jobs.cgi?id=38715 http://aviation.thingamajob.com/jobs/Texas/Aircraft-Cabinet-Maker/1715779?vendor_id=35

Our client is looking for two Aircraft Cabinet Makers\Install for an immediate opening in Denton TX. Candidates must be very experienced with Aircraft Cabinet making and installation. Must be experienced with reading Blueprints. This position is a six month contract and Per Diem is available for those who Qualify. Our Client is hiring as soon as possible, so please send resumes to Brad Leksan by the following means. Phone: 972.348.1816 Email: bleksan@aerotek.com Fax: 972.671.2206

CABINET MAKING, AIRCRAFT INTERIORS, BLUEPRINT READING true false false true false USD 2008-08-14

Denton TX US bleksan@aerotek.com 972-348-1816 972-671-2206